Real H31-341_V2.5 Exam PDF Test Engine Practice Test Questions
Huawei H31-341_V2.5 Real 2026 Braindumps Mock Exam Dumps
Candidates who pass the Huawei H31-341_V2.5 certification exam will be recognized as certified HCIP-Transmission engineers, and they will have the necessary knowledge and skills to work on Huawei's transmission products. HCIP-Transmission V2.5 certification is ideal for professionals who are interested in pursuing a career in telecommunication and transmission technologies. Additionally, the HCIP-Transmission V2.5 certification is a valuable asset for individuals who are already working in the industry and are looking to enhance their skills and advance their careers. Overall, the Huawei H31-341_V2.5 exam is a must-have certification for professionals who want to work with Huawei's transmission products and advance their careers in the telecommunication industry.
Huawei H31-341_V2.5 (HCIP-Transmission V2.5) exam is a certification exam designed to validate the skills and knowledge of professionals who work with Huawei transmission technology. It covers a wide range of topics related to the design, implementation, and maintenance of transmission networks, including optical fiber communication, IP/MPLS, and microwave transmission. Passing H31-341_V2.5 exam is a prerequisite for obtaining the HCIP-Transmission certification, which is recognized by organizations worldwide.
NEW QUESTION # 54
For a multipoint-to-point topology, which of the following needs to be set to the TIN detection mode on the network management?
- A. Trail terminal sink only compares SAPI
- B. Path Terminal Comparison SAPI&DAPI
- C. Path end sink compares DAPI only
Answer: C
NEW QUESTION # 55
The number of ODU2e signals multiplexed into ODU3 signals is the same as the number of ODU2 signals multiplexed into ODU3 signals.
- A. True
- B. False
Answer: B
NEW QUESTION # 56
In the WDM system, if the TTI to be sent by the SM layer is inconsistent with the TTI to be received, an ( ) alarm will be reported.
Answer:
Explanation:
OTUK_TIM
NEW QUESTION # 57
Which of the following descriptions about colorless networking is wrong?
- A. Use the ROADM single board to realize the function of adding and dropping any wavelength from any port
- B. Fixed-wavelength optical modules cannot be used for line single-board optical modules.
- C. You can use TM20/TD20 to realize the access of coherent signals, and use WSM9/WSD9 to realize the access of non-coherent signals.
- D. The line single-board optical module can use a tunable wavelength optical module.
Answer: A
NEW QUESTION # 58
Which of the following layers of overhead belong to the electrical layer overhead of OTN? (Multiple choice)
- A. ODUk
- B. OCH
- C. OPUk
- D. OTUk
Answer: A,C,D
NEW QUESTION # 59
When using the path method to create OCh, which of the following service layer paths is required?
- A. Client
- B. OTS
- C. ODUk
- D. OMS
Answer: D
NEW QUESTION # 60
Please drag the correct answer to the number in the picture.
Answer:
Explanation:
NEW QUESTION # 61
In the WDM network design, as long as enough EDFAs are cascaded to compensate the optical power loss in the transmission process. Then the system can transmit very long distance without limitation.
- A. True
- B. False
Answer: B
NEW QUESTION # 62
Among the following options, which ones belong to MPLS-TP OAM detection objects? (Multiple choice)
- A. Tunnel layer
- B. Business layer
- C. Section layer
- D. PW layer
Answer: A,C,D
NEW QUESTION # 63
There are two transmission modes in the WDM system, respectively () is and ()
Answer:
Explanation:
Single fiber unidirectional | Single fiber bidirectional
NEW QUESTION # 64
Which of the following descriptions about the signal flow at the OTM site (OSN 8800 equipment) is wrong?
- A. Service sending direction: SDH signals -> LSX -> M40V -> OBU1 -> Line
- B. OSC receiving direction: Line -> FIU -> Sc2
- C. Service receiving direction: Line -> FIU -> OAU -> M40V -> LSX -> SDH signals
- D. Service sending direction: SDH signals -> LSX -> M40V -> OBU1 -> FIU -> Line
Answer: C
NEW QUESTION # 65
The frame structure size of the OTUk frame is variable.
- A. True
- B. False
Answer: B
NEW QUESTION # 66
The inter-board crossover refers to the cross-connection configured between different single boards. Which inter-board crossover between boards can be realized on the network management? (Multiple choice)
- A. Between TU and TU
- B. Between TU and LU
- C. Between OTU and OTU
- D. Between LU and LU
Answer: A,B,C,D
NEW QUESTION # 67
After the U2000 delivers configuration data to the NE, if the verification of the SCC board fails, the NE enters the installation state.
- A. False
- B. True
Answer: B
NEW QUESTION # 68
The interval between two adjacent pointer alignment events is at least () frames.
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION # 69
Optical fiber and LEAP optical fiber systems, 1006 and 106 mixed transmissions need to set up isolation bands, and only one-sided adjacency is supported, and double-sided adjacency is prohibited. 100G is preferentially configured with long wavelengths, and 10G is configured with short wavelengths.
- A. False
- B. True
Answer: B
NEW QUESTION # 70
Which of the following descriptions about the TMK1UNS5 board is wrong?
- A. It supports relay mode, which can be used in the electrical relay station in the system to realize the electrical relay function of the corresponding optical signal.
- B. Support mixed transmission of ODUO, ODU1, ODU2, ODU2e, ODU3, ODU4, ODUflex.
- C. Support the transmission of OTN services whose total bandwidth does not exceed 200 Gbit/s.
- D. This board belongs to the unified line board, and the current version supports mixed transmission of OTN service, SDH service and packet service.
Answer: B
NEW QUESTION # 71
Which of the following descriptions about the TNV2E224 board is correct? (Multiple choice)
- A. PHY loopback is supported, but MAC loopback is not supported.
- B. On the U64 standard/U64 enhanced/U32 standard subrack, the backplane bandwidth is 200 Gbit/s
- C. It is used in conjunction with the system-circuit board, and the cross-scheduling granularity between branch line boards is Packets.
- D. Support VPWS and VPLS services.
Answer: B,D
NEW QUESTION # 72
HONET integrated service access network belongs to () access mode
Answer:
Explanation:
optical fiber
NEW QUESTION # 73
......
The H31-341_V2.5 exam covers a wide range of topics, including transmission network principles, network planning and design, network deployment and maintenance, network optimization and troubleshooting, and Huawei's transmission product portfolio. Candidates will be required to demonstrate their understanding of these topics through a combination of multiple-choice questions, written scenarios, and hands-on lab exercises. H31-341_V2.5 exam is rigorous and challenging, but it provides a valuable opportunity for professionals to showcase their expertise in the field.
Prepare For The H31-341_V2.5 Question Papers In Advance: https://www.crampdf.com/H31-341_V2.5-exam-prep-dumps.html
Released Huawei H31-341_V2.5 Updated Questions PDF: https://drive.google.com/open?id=1J-G92wKL4CItFRu123y6fd_teTDTHMAS