The FCP_FCT_AD-7.2 PDF Dumps Greatest for the Fortinet Exam Study Guide!
Read Online FCP_FCT_AD-7.2 Test Practice Test Questions Exam Dumps
Fortinet FCP_FCT_AD-7.2 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
NEW QUESTION # 25
Refer to the exhibit. Based on the settings shown in the exhibit, which action will FortiClient take when users try to access www.facebook.com?
- A. FortiClient will monitor only the user's web access to the Facebook website
- B. FortiClient will prompt a warning message to want the user before they can access the Facebook website
- C. FortiClient will allow access to Facebook.
- D. FortiClient will block access to Facebook and its subdomains.
Answer: C
Explanation:
Observation of Web Filter Exclusions:
The exhibit shows a web filter exclusion for "*.facebook.com" with the action set to "Allow." Evaluating Actions:
This configuration means that FortiClient will allow access to Facebook and its subdomains.
Conclusion:
When users try to access "www.facebook.com," FortiClient will allow the access based on the web filter exclusion settings.
NEW QUESTION # 26
An administrator needs to connect FortiClient EMS as a fabric connector to FortiGate What is the prerequisite to get FortiClient EMS lo connect to FortiGate successfully?
- A. Revoke and update the FortiClient EMS root CA.
- B. Import and verify the FortiClient EMS tool CA certificate on FortiGate.
- C. Revoke and update the FortiClient client certificate on EMS.
- D. Import and verify the FortiClient client certificate on FortiGate.
Answer: B
Explanation:
Connecting FortiClient EMS to FortiGate:
The administrator needs to establish a connection between FortiClient EMS and FortiGate as a fabric connector.
Prerequisites for Connection:
A key prerequisite is the import and verification of the FortiClient EMS tool CA certificate on FortiGate to ensure a trusted connection.
Conclusion:
The correct prerequisite for a successful connection is to import and verify the FortiClient EMS tool CA certificate on FortiGate.
Reference:
FortiClient EMS and FortiGate connection and certificate management documentation from the study guides.
NEW QUESTION # 27
Exhibit.
Based on the FortiClient logs shown in the exhibit, which endpoint profile policy is currently applied lo the ForliClient endpoint from the EMS server?
- A. Compliance rules default
- B. Fortinet-Training
- C. Default configuration policy c
- D. Default
Answer: B
Explanation:
Observation of Logs:
The logs show a policy named "Fortinet-Training" being applied to the endpoint.
Evaluating Policies:
The log entries indicate that the "Fortinet-Training" policy was received and applied.
Conclusion:
Based on the logs, the currently applied policy on the FortiClient endpoint is "Fortinet-Training".
Reference:
FortiClient EMS policy configuration and log analysis documentation from the study guides.
NEW QUESTION # 28
Refer to the exhibit.
Based on the FortiClient tog details shown in the exhibit, which two statements ace true? (Choose two.)
- A. The file status is Quarantined
- B. The file location is \??\D:\Users\.
- C. The filename is sent to FortiSandbox for further inspection.
- D. The filename Is Unconfirmed 899290.crdovnload.
Answer: A,D
NEW QUESTION # 29
Refer to the exhibit. Based on the settings shown in the exhibit, which two actions must the administrator take to make the endpoint compliant? (Choose two.)
- A. Run Calculator application on the endpoint.
- B. Integrate FortiSandbox tor infected file analysis
- C. Enable the web filter profile.
- D. Patch applications that have vulnerability rated as high or above.
Answer: A,D
Explanation:
Observation of Compliance Profile:
The compliance profile shown in the exhibit includes rules for vulnerability severity level and running process (Calculator.exe).
Evaluating Actions for Compliance:
To make the endpoint compliant, the administrator needs to ensure that the vulnerability severity level is medium or higher is patched (D).
Additionally, the Calculator.exe application must be running on the endpoint (B).
Eliminating Incorrect Options:
Enabling the web filter profile (A) is not related to the compliance rules shown.
Integrating FortiSandbox (C) is not a requirement in the given compliance profile.
Conclusion:
The correct actions are to run the Calculator application on the endpoint (B) and patch applications with vulnerabilities rated as high or above (D).
NEW QUESTION # 30
Refer to the exhibit, which shows the output of the ZTNA traffic log on FortiGate.
What can you conclude from the log message?
- A. The remote user connection does not match the ZTNA server configuration.
- B. The remote user connection does not match the ZTNA firewall policy.
- C. The remote user connection does not match the local-in policy.
- D. The remote user connection does not match the ZTNA rule configuration.
Answer: D
Explanation:
Observation of ZTNA Traffic Log:
The log message indicates that the remote user connection was denied due to failure to match a proxy policy.
Evaluating Log Message:
The message suggests that the connection does not match the existing ZTNA rule configuration, leading to the denial.
Conclusion:
The correct conclusion from the log message is that the remote user connection does not match the ZTNA rule configuration (B).
NEW QUESTION # 31
What is the function of the quick scan option on FortiClient?
- A. It allows users to select a specific file folder on their local hard disk drive (HDD), to scan for threats.
- B. It scans programs and drivers that are currently running, for threats
- C. It scans executable files. DLLs, and drivers that are currently running, for threats.
- D. It performs a full system scan including all files, executable files. DLLs, and drivers for throats.
Answer: C
Explanation:
Understanding Quick Scan Function:
The quick scan option on FortiClient is designed to scan certain elements of the system quickly for threats.
Evaluating Scan Scope:
The quick scan specifically targets executable files, DLLs, and drivers that are currently running, providing a rapid assessment of the active components of the system.
Conclusion:
The correct answer is D, as it accurately describes the function of the quick scan option on FortiClient.
Reference:
FortiClient scanning options documentation from the study guides.
NEW QUESTION # 32
Which FortiClient feature is required, to block access to malicious websites?
- A. Web filtering
- B. Antiexploit
- C. Application firewall
- D. Sandbox integration
Answer: A
NEW QUESTION # 33
Which two third-party tools can an administrator use to deploy FortiClient? (Choose two.)
- A. Microsoft Windows Installer
- B. Microsoft Active Directory GPO
- C. QR code generator
- D. Microsoft SCCM
Answer: B,D
Explanation:
Administrators can use several third-party tools to deploy FortiClient:
Microsoft SCCM (System Center Configuration Manager): SCCM is a robust tool used for deploying software across large numbers of Windows-based systems. It supports deployment of FortiClient through its software distribution capabilities.
Microsoft Active Directory GPO (Group Policy Object): GPOs are used to manage user and computer settings in an Active Directory environment. Administrators can deploy FortiClient to multiple machines using GPO software installation settings.
These tools provide centralized and scalable methods for deploying FortiClient across numerous endpoints in an enterprise environment.
NEW QUESTION # 34
Which two third-party tools can an administrator use to deploy FortiClient? (Choose two.)
- A. Microsoft Windows Installer
- B. Microsoft Active Directory GPO
- C. QR code generator
- D. Microsoft SCCM
Answer: B,D
Explanation:
Administrators can use several third-party tools to deploy FortiClient:
Microsoft SCCM (System Center Configuration Manager): SCCM is a robust tool used for deploying software across large numbers of Windows-based systems. It supports deployment of FortiClient through its software distribution capabilities.
Microsoft Active Directory GPO (Group Policy Object): GPOs are used to manage user and computer settings in an Active Directory environment. Administrators can deploy FortiClient to multiple machines using GPO software installation settings.
These tools provide centralized and scalable methods for deploying FortiClient across numerous endpoints in an enterprise environment.
Reference
FortiClient EMS 7.2 Study Guide, FortiClient Deployment Section
Fortinet Documentation on FortiClient Deployment using SCCM and GPO
NEW QUESTION # 35
Which two are benefits of using multi-tenancy mode on FortiClient EMS? (Choose two.)
- A. It provides granular access and segmentation.
- B. Separate host servers manage each site.
- C. Licenses are shared among sites
- D. The fabric connector must use an IP address to connect to FortiClient EMS.
Answer: A,C
Explanation:
Understanding Multi-Tenancy Mode:
Multi-tenancy mode allows multiple independent sites or tenants to be managed from a single FortiClient EMS instance.
Evaluating Benefits:
Licenses can be shared among sites, making it cost-effective (B).
It provides granular access and segmentation, allowing for detailed control and separation between tenants (D).
Eliminating Incorrect Options:
Separate host servers managing each site (A) is not a feature of multi-tenancy mode.
The fabric connector's use of an IP address (C) is unrelated to multi-tenancy benefits.
NEW QUESTION # 36
Which three types of antivirus scans are available on FortiClient? (Choose three )
- A. Proxy scan
- B. Flow scan
- C. Quick scan
- D. Full scan
- E. Custom scan
Answer: C,D,E
Explanation:
FortiClient offers several types of antivirus scans to ensure comprehensive protection:
Full scan: Scans the entire system for malware, including all files and directories.
Custom scan: Allows the user to specify particular files, directories, or drives to be scanned.
Quick scan: Scans the most commonly infected areas of the system, providing a faster scanning option.
These three types of scans provide flexibility and thoroughness in detecting and managing malware threats.
NEW QUESTION # 37
An administrator installs FortiClient on Windows Server.
What is the default behavior of real-time protection control?
- A. Real-time protection must update AV signature database
- B. Real-time protection sends malicious files to FortiSandbox when the file is not detected locally
- C. Real-time protection is disabled
- D. Real-time protection must update the signature database from FortiSandbox
Answer: C
Explanation:
When FortiClient is installed on a Windows Server, the default behavior for real-time protection control is:
Real-time protection is disabled: By default, FortiClient does not enable real-time protection on server installations to avoid potential performance impacts and because servers typically have different security requirements compared to client endpoints.
Thus, real-time protection is disabled by default on Windows Server installations.
NEW QUESTION # 38
Which statement about FortiClient comprehensive endpoint protection is true?
- A. It helps to safeguard systems from data loss.
- B. It helps to safeguard systems from DDoS.
- C. It helps to safeguard systems from email spam
- D. lt helps to safeguard systems from advanced security threats, such as malware.
Answer: D
Explanation:
FortiClient provides comprehensive endpoint protection for your Windows-based, Mac-based, and Linuxbased desktops, laptops, file servers, and mobile devices such as iOS and Android. It helps you to safeguard your systems with advanced security technologies, all of which you can manage from a single management console.
NEW QUESTION # 39
Refer to the exhibit.
Based on the CLI output from FortiGate. which statement is true?
- A. FortiGate is configured to pull user groups from FortiClient EMS
- B. FortiGate is configured to pull user groups from FortiAuthenticator
- C. FortiGate is configured with local user group
- D. FortiGate is configured to pull user groups from AD Server.
Answer: A
Explanation:
Based on the CLI output from FortiGate:
* The configuration shows the use of "type fortiems," indicating that FortiGate is set up to interact with FortiClient EMS.
* The "server" field points to an IP address (10.0.1.200), which is typically the address of the FortiClient EMS server.
* The configuration includes an SSL-enabled connection, which is a common setup for secure communication between FortiGate and FortiClient EMS.
Thus, the configuration indicates that FortiGate is set up to pull user groups from FortiClient EMS.
References
* FortiGate Security 7.2 Study Guide, FSSO Configuration Section
* Fortinet Documentation on FortiGate and FortiClient EMS Integration
NEW QUESTION # 40
Refer to the exhibit.
Based on the settings shown in the exhibit, which action will FortiClient take when users try to access www facebook com?
- A. FortiClient will monitor only the user's web access to the Facebook website
- B. FortiClient will prompt a warning message to want the user before they can access the Facebook website
- C. FortiClient will block access to Facebook and its subdomains.
- D. FortiClient will allow access to Facebook.
Answer: C
Explanation:
* Observation of Web Filter Exclusions:
* The exhibit shows a web filter exclusion for "*.facebook.com" with the action set to "Allow."
* Evaluating Actions:
* This configuration means that FortiClient will allow access to Facebook and its subdomains.
* Conclusion:
* When users try to access "www.facebook.com," FortiClient will allow the access based on the web filter exclusion settings.
References:
* FortiClient web filter configuration and exclusion documentation from the study guides.
NEW QUESTION # 41
Exhibit.
Refer to the exhibits, which show the Zero Trust Tag Monitor and the FortiClient GUI status.
Remote-Client is tagged as Remote-User* on the FortiClient EMS Zero Trust Tag Monitor.
What must an administrator do to show the tag on the FortiClient GUI?
- A. Change the FortiClient EMS shared settings to enable tag visibility.
- B. Update tagging rule logic to enable tag visibility.
- C. Change the FortiClient system settings to enable lag visibility.
- D. Change the endpoint alerts configuration to enable tag visibility.
Answer: D
Explanation:
* Observation of Exhibits:
* The exhibits show the Zero Trust Tag Monitor on FortiClient EMS and the FortiClient GUI status.
* Remote-Client is tagged as "Remote-Endpoints" on the FortiClient EMS Zero Trust Tag Monitor.
* Enabling Tag Visibility:
* To show the tag on the FortiClient GUI, the endpoint alerts configuration must be adjusted to enable tag visibility.
* Verification:
* The correct action is to change the endpoint alerts configuration to enable tag visibility, ensuring that the tag appears in the FortiClient GUI.
References:
* FortiClient EMS and FortiClient configuration documentation from the study guides.
NEW QUESTION # 42
Refer to the exhibit.
Based on The settings shown in The exhibit, which statement about FortiClient behaviour is Hue?
- A. FortiClient blocks and deletes infected files after scanning them.
- B. FortiClient copies infected files to the Resources folder without scanning them.
- C. FortiClient quarantines infected ties and reviews later, after scanning them.
- D. FortiClient scans infected files when the user copies files to the Resources folder.
Answer: D
Explanation:
Based on the settings shown in the exhibit, FortiClient is configured to scan files as they are downloaded or copied to the system. This means that if a user copies files to the "Resources" folder, which is not listed under exclusions, FortiClient will scan these files for infections. The exclusion path mentioned in the settings, "C:
\Users\Administrator\Desktop\Resources", indicates that any files copied to this specific folder will not be scanned, but since the question implies that the "Resources" folder is not the same as the excluded path, FortiClient will indeed scan the files for infections.
NEW QUESTION # 43
Refer to the exhibit.
Based on The settings shown in The exhibit, which statement about FortiClient behaviour is Hue?
- A. FortiClient blocks and deletes infected files after scanning them.
- B. FortiClient copies infected files to the Resources folder without scanning them.
- C. FortiClient quarantines infected ties and reviews later, after scanning them.
- D. FortiClient scans infected files when the user copies files to the Resources folder.
Answer: D
Explanation:
Based on the settings shown in the exhibit, FortiClient is configured to scan files as they are downloaded or copied to the system. This means that if a user copies files to the "Resources" folder, which is not listed under exclusions, FortiClient will scan these files for infections. The exclusion path mentioned in the settings, "C:\Users\Administrator\Desktop\Resources", indicates that any files copied to this specific folder will not be scanned, but since the question implies that the "Resources" folder is not the same as the excluded path, FortiClient will indeed scan the files for infections.
NEW QUESTION # 44
Refer to the exhibit. Based on the FortiClient tog details shown in the exhibit, which two statements are true? (Choose two.)
- A. The file status is Quarantined
- B. The file location is \??\D:\Users\.
- C. The filename is sent to FortiSandbox for further inspection.
- D. The filename is Unconfirmed 899290.crdownload.
Answer: A,D
NEW QUESTION # 45
Refer to the exhibit.
Based on the settings shown in the exhibit what action will FortiClient take when it detects that a user is trying to download an infected file?
- A. Quarantines the infected files and logs all access attempts
- B. Allows the infected file to download without scan
- C. Blocks the infected files as it is downloading
- D. Sends the infected file to FortiGuard for analysis
Answer: B
Explanation:
Block Malicious Website has nothing to do with infected files. Since Realtime Protection is OFF, it will be allowed without being scanned.
Based on the settings shown in the exhibit:
* Realtime Protection:OFF
* Dynamic Threat Detection:OFF
* Block malicious websites:ON
* Threats Detected:75
The "Realtime Protection" setting is crucial for preventing infected files from being downloaded and executed. Since "Realtime Protection" is OFF, FortiClient will not actively scan files being downloaded. The setting "Block malicious websites" is intended to prevent access to known malicious websites but does not scan files for infections.
Therefore, when a user tries to download an infected file, FortiClient will allow the file to download without scanning it due to the Realtime Protection being OFF.
References
* FortiClient EMS 7.2 Study Guide, Antivirus Protection Section
* Fortinet Documentation on FortiClient Real-time Protection Settings
NEW QUESTION # 46
Refer to the exhibit, which shows the Zero Trust Tagging Rule Set configuration.
Which two statements about the rule set are true? (Choose two.)
- A. The endpoint must satisfy that antivirus is installed and running and Windows 10 is running.
- B. The endpoint must satisfy that only Windows Server 2012 R2 is running.
- C. The endpoint must satisfy that only Windows 10 is running.
- D. The endpoint must satisfy that only AV software is installed and running.
Answer: A,B
Explanation:
Based on the Zero Trust Tagging Rule Set configuration shown in the exhibit:
* The rule set includes two conditions:
* AV Software is installed and running
* OS Version is Windows Server 2012 R2 or Windows 10
* The Rule Logic is specified as "(1 and 3) or 2," meaning:
* The endpoint must have antivirus software installed and running and must be running Windows
10.
* Alternatively, the endpoint must be running Windows Server 2012 R2.
Therefore, the endpoint must satisfy either:
* Antivirus is installed and running and Windows 10 is running.
* Windows Server 2012 R2 is running.
References
* FortiClient EMS 7.2 Study Guide, Zero Trust Tagging Rule Set Configuration Section
* Fortinet Documentation on Configuring Zero Trust Tagging Rules and Logic
NEW QUESTION # 47
Refer to the exhibit.
Based on the CLI output from FortiGate. which statement is true?
- A. FortiGate is configured to pull user groups from FortiClient EMS
- B. FortiGate is configured to pull user groups from FortiAuthenticator
- C. FortiGate is configured with local user group
- D. FortiGate is configured to pull user groups from AD Server.
Answer: A
Explanation:
Based on the CLI output from FortiGate:
The configuration shows the use of "type fortiems," indicating that FortiGate is set up to interact with FortiClient EMS.
The "server" field points to an IP address (10.0.1.200), which is typically the address of the FortiClient EMS server.
The configuration includes an SSL-enabled connection, which is a common setup for secure communication between FortiGate and FortiClient EMS.
Thus, the configuration indicates that FortiGate is set up to pull user groups from FortiClient EMS.
Reference
FortiGate Security 7.2 Study Guide, FSSO Configuration Section
Fortinet Documentation on FortiGate and FortiClient EMS Integration
NEW QUESTION # 48
Refer to the exhibit, which shows the endpoint summary information on FortiClient EMS.
What two conclusions can you make based on the Remote-Client status shown above? (Choose two.)
- A. The endpoint is classified as at risk.
- B. The endpoint is currently off-net.
- C. The endpoint is configured to support FortiSandbox.
- D. The endpoint has been assigned the Default endpoint policy.
Answer: B,D
Explanation:
Based on the Remote-Client status shown in the exhibit:
Endpoint Policy: The "Policy" field shows "Default," indicating that the endpoint has been assigned the Default endpoint policy.
Connection Status: The "Location" field shows "Off-Fabric," meaning that the endpoint is currently off the corporate network (off-net).
Therefore, the two conclusions that can be made are:
The endpoint has been assigned the Default endpoint policy.
The endpoint is currently off-net.
Reference
FortiClient EMS 7.2 Study Guide, Endpoint Summary Information Section
Fortinet Documentation on Endpoint Policies and Status Indicators
NEW QUESTION # 49
Refer to the exhibit, which shows the Zero Trust Tagging Rule Set configuration.
Which two statements about the rule set are true? (Choose two.)
- A. The endpoint must satisfy that antivirus is installed and running and Windows 10 is running.
- B. The endpoint must satisfy that only Windows Server 2012 R2 is running.
- C. The endpoint must satisfy that only Windows 10 is running.
- D. The endpoint must satisfy that only AV software is installed and running.
Answer: A,B
Explanation:
Based on the Zero Trust Tagging Rule Set configuration shown in the exhibit:
* The rule set includes two conditions:
* AV Software is installed and running
* OS Version is Windows Server 2012 R2 or Windows 10
* The Rule Logic is specified as "(1 and 3) or 2," meaning:
* The endpoint must have antivirus software installed and running and must be running Windows
10.
* Alternatively, the endpoint must be running Windows Server 2012 R2.
Therefore, the endpoint must satisfy either:
* Antivirus is installed and running and Windows 10 is running.
* Windows Server 2012 R2 is running.
References
* FortiClient EMS 7.2 Study Guide, Zero Trust Tagging Rule Set Configuration Section
* Fortinet Documentation on Configuring Zero Trust Tagging Rules and Logic
NEW QUESTION # 50
......
FCP_FCT_AD-7.2 Certification All-in-One Exam Guide Mar-2026: https://www.crampdf.com/FCP_FCT_AD-7.2-exam-prep-dumps.html
Easily To Pass New FCP_FCT_AD-7.2 Premium Exam: https://drive.google.com/open?id=1uG9mwuTzJyLfWB92-1oN-CKxtdaHjt-G