[Oct-2024] Pass Fortinet NSE7_OTS-7.2 Exam in First Attempt Guaranteed!
Full NSE7_OTS-7.2 Practice Test and 74 unique questions with explanations waiting just for you, get it now!
NEW QUESTION # 10
Which three Fortinet products can be used for device identification in an OT industrial control system (ICS)?
(Choose three.)
- A. FortiSIEM
- B. FortiManager
- C. FortiAnalyzer
- D. FortiNAC
- E. FortiGate
Answer: A,D,E
Explanation:
Explanation
A: FortiNAC - FortiNAC is a network access control solution that provides visibility and control over network devices. It can identify devices, enforce access policies, and automate threat response.
D: FortiSIEM - FortiSIEM is a security information and event management solution that can collect and analyze data from multiple sources, including network devices and servers. It can help identify potential security threats, as well as monitor compliance with security policies and regulations.
E: FortiAnalyzer - FortiAnalyzer is a central logging and reporting solution that collects and analyzes data from multiple sources, including FortiNAC and FortiSIEM. It can provide insights into network activity and help identify anomalies or security threats.
NEW QUESTION # 11
An OT administrator configured and ran a default application risk and control report in FortiAnalyzer to learn more about the key application crossing the network. However, the report output is empty despite the fact that some related real-time and historical logs are visible in the FortiAnalyzer.
What are two possible reasons why the report output was empty? (Choose two.)
- A. The administrator selected the wrong logs to be indexed in FortiAnalyzer.
- B. The administrator selected the wrong hcache table for the report.
- C. The administrator selected the wrong time period for the report.
- D. The administrator selected the wrong devices in the Devices section.
Answer: C,D
Explanation:
Explanation
https://fortinetweb.s3.amazonaws.com/docs.fortinet.com/v2/attachments/32cb817d-a307-11eb-b70b-0050569258
NEW QUESTION # 12
Refer to the exhibits.
Which statement is true about the traffic passing through to PLC-2?
- A. The application filter overrides the default action of some IEC 104 signatures.
- B. SSL Inspection must be set to deep-inspection to correctly apply application control.
- C. IPS must be enabled to inspect application signatures.
- D. IEC 104 signatures are all allowed except the C.BO.NA 1 signature.
Answer: A
NEW QUESTION # 13
What are two critical tasks the OT network auditors must perform during OT network risk assessment and management? (Choose two.)
- A. Planning a threat hunting strategy
- B. Creating disaster recovery plans to switch operations to a backup plant
- C. Evaluating what can go wrong before it happens
- D. Implementing strategies to automatically bring PLCs offline
Answer: A,B
NEW QUESTION # 14
Which three Fortinet products can you use for device identification in an OT industrial control system (ICS)? (Choose three.)
- A. FortiSIEM
- B. FortiManager
- C. FortiAnalyzer
- D. FortiNAC
- E. FortiGate
Answer: A,D,E
NEW QUESTION # 15
The OT network analyst runs different level of reports to quickly explore threats that exploit the network. Such reports can be run on all routers, switches, and firewalls. Which FortiSIEM reporting method helps to identify these type of exploits of image firmware files?
- A. Threat hunting reports
- B. CMDB reports
- C. OT/loT reports
- D. Compliance reports
Answer: A
NEW QUESTION # 16
An OT network consists of multiple FortiGate devices. The edge FortiGate device is deployed as the secure gateway and is only allowing remote operators to access the ICS networks on site.
Management hires a third-party company to conduct health and safety on site. The third-party company must have outbound access to external resources. As the OT network administrator, what is the best scenario to provide external access to the third- party company while continuing to secure the ICS networks?
- A. Implement an additional firewall using an additional upstream link to the internet.
- B. Split the edge FortiGate device into multiple logical devices to allocate an independent VDOM for the third-party company.
- C. Create VPN tunnels between downstream FortiGate devices and the edge FortiGate to protect ICS network traffic.
- D. Configure outbound security policies with limited active authentication users of the third-party company.
Answer: B
NEW QUESTION # 17
What two advantages does FortiNAC provide in the OT network? (Choose two.)
- A. It can be used for network micro-segmentation.
- B. It can be used for industrial intrusion detection and prevention.
- C. It can be used for IoT device detection.
- D. It can be used for device profiling.
Answer: C,D
Explanation:
Explanation
Typically, in a microsegmented network, NGFWs are used in conjunction with VLANs to implement security policies and to inspect and filter network communications. Fortinet FortiSwitch and FortiGate NGFW offer an integrated approach to microsegmentation.
NEW QUESTION # 18
What are two critical tasks the OT network auditors must perform during OT network risk assessment and management? (Choose two.)
- A. Creating disaster recovery plans to switch operations to a backup plant
- B. Implementing strategies to automatically bring PLCs offline
- C. Evaluating what can go wrong before it happens
- D. Planning a threat hunting strategy
Answer: A,B
NEW QUESTION # 19
As an OT administrator, it is important to understand how industrial protocols work in an OT network. Which communication method is used by the Modbus protocol?
- A. It uses OSI Layer 2 and the secondary device sends data based on request from primary device.
- B. It uses OSI Layer 2 and both the primary/secondary devices always send data during the communication.
- C. It uses OSI Layer 2 and both the primary/secondary devices send data based on a matching token ring.
- D. It uses OSI Layer 2 and the primary device sends data based on request from secondary device.
Answer: A
NEW QUESTION # 20
Refer to the exhibit.
Based on the Purdue model, which three measures can be implemented in the control area zone using the Fortinet Security Fabric? (Choose three.)
- A. FortiEDR for endpoint detection
- B. FortiGate for application control and IPS
- C. FortiGate for SD-WAN
- D. FortiNAC for network access control
- E. FortiSIEM for security incident and event management
Answer: A,B,D
NEW QUESTION # 21
Refer to the exhibit.
You need to configure VPN user access for supervisors at the breach and HQ sites using the same soft FortiToken. Each site has a FortiGate VPN gateway.
What must you do to achieve this objective?
- A. You must register the same FortiToken on more than one FortiGate.
- B. You must use a FortiAuthenticator.
- C. You must use a third-party RADIUS OTP server.
- D. You must use the user self-registration server.
Answer: B
NEW QUESTION # 22
Refer to the exhibit
In the topology shown in the exhibit, both PLCs can communicate directly with each other, without going through the firewall.
Which statement about the topology is true?
- A. PLCs use IEEE802.1Q protocol to communicate each other.
- B. There is no micro-segmentation in this topology.
- C. An administrator can create firewall policies in the switch to secure between PLCs.
- D. This integration solution expands VLAN capabilities from Layer 2 to Layer 3.
Answer: B
NEW QUESTION # 23
Refer to the exhibit.
Which statement about the interfaces shown in the exhibit is true?
- A. port1-vlan10 and port2-vlan10 are part of the same broadcast domain
- B. port2, port2-vlan10, and port2-vlan1 are part of the software switch interface.
- C. The VLAN ID of port1-vlan1 can be changed to the VLAN ID 10.
- D. port1, port1-vlan10, and port1-vlan1 are in different broadcast domains
Answer: D
NEW QUESTION # 24
The OT network analyst run different level of reports to quickly explore failures that could put the network at risk. Such reports can be about device performance. Which FortiSIEM reporting method helps to identify device failures?
- A. Business service reports
- B. CMDB operational reports
- C. Active dependent rules reports
- D. Device inventory reports
Answer: B
NEW QUESTION # 25
Refer to the exhibit. You need to configure VPN user access for supervisors at the breach and HQ sites using the same soft FortiToken. Each site has a FortiGate VPN gateway.
What must you do to achieve this objective?
- A. You must register the same FortiToken on more than one FortiGate.
- B. You must use a FortiAuthenticator.
- C. You must use a third-party RADIUS OTP server.
- D. You must use the user self-registration server.
Answer: B
NEW QUESTION # 26
......
Prepare for your Fortinet certification with the updated CramPDF NSE7_OTS-7.2 exam questions: https://drive.google.com/open?id=1KKMjwDYIQuKnxTieG3T6FtnffqEu3tQc
Get Latest NSE7_OTS-7.2 Dumps Exam Questions in here: https://www.crampdf.com/NSE7_OTS-7.2-exam-prep-dumps.html