Oct-2024 FREE CWNP CWT-101 PRACTICE QUESTIONS AND ANSWERS UPDATES
DEMO FREE BEFORE YOU BUY CWT-101 DUMPS
CWNP CWT-101 Exam Topics:
| Section | Objectives |
|---|---|
Basic RF Characteristics (15%) | |
| Describe RF signal characteristics | - Frequency - Amplitude - Phase - Wavelength |
| Explain RF behaviors and signal propagation | - Gain and loss - Reflection - Refraction - Scattering - Free space path loss |
| Understand how to detect RF signal factors | - Wireless scanner tools - Client signal strength reports - RSSI vs. dBm - Output power vs. received signal strength |
| Understand basic RF channel plans | - Available channels by protocol - Regulatory constraints on channel selection - Best practices for channel selection - Co-Channel Interference (CCI) and Co-Channel Contention (CCC) |
| Describe the basic differences among antenna types | - Omnidirectional - Semi-directional - Highly directional - Antenna mounting kits |
| Use the appropriate external antenna when required | - Antenna pattern charts - Antenna cables and connectors - Passive antenna gain |
Wireless Device Features and Capabilities (25%) | |
| Describe device types and varying capabilities | - Laptops - Tablets - Mobile phones - Desktops - Specialty devices (video cameras, Wi-Fi peripheral connections, printers, IoT, etc.) |
| Explain the basic WLAN location processes for 802.11 wireless networks | - Passive scanning - Active scanning |
| Describe the basic steps required in the WLAN connection process for 802.11 wireless networks | - Authentication - Association - 802.1X/EAP authentication - 4-way handshake |
| Determine the RF features supported by client and IoT devices | - Supported channels - Channel widths - Transmit power - Receive sensitivity |
| Configure client and IoT devices | - Configure client drivers for optimum performance (band preference, roaming threshold, regulatory domain, etc.) for 802.11 devices
- Configure various IoT devices based on the supported protocol
|
Wireless Protocol Features and Capabilities (25%) | |
| Identify 802.11 AP features and capabilities and understand configuration options related to them | - PHY and frequency band support - Single-band vs. dual-band - Output power control - Operational modes - Multiple-SSID support - Guest access - Security features - Management interfaces (web-based, CLI, remote CLI) - Internal and external antennas - PoE support |
| Use appropriate 802.11 AP mounting kits for a specified installation location | - Wall mount - Pole/mast mount - Ceiling mount |
CWNP CWT-101 Exam Certification Details:
| Number of Questions | 60 |
| Recommended Training | Live Training Class Self-Paced Training Kit Study and Reference Guide Electronic Practice Test eLearning Module eLearning Bundle |
| Exam Code | CWT-101 CWT |
| Passing Score | 70% |
| Exam Price | $150 USD |
| Duration | 90 minutes |
| Sample Questions | CWNP CWT-101 Sample Questions |
| Exam Registration | PEARSON VUE |
NEW QUESTION # 82
Which characteristic of an RF signal is related to the distance between successive peaks?
- A. Phase
- B. Amplitude
- C. Wavelength
- D. Frequency
Answer: C
NEW QUESTION # 83
You have implemented an 802.11 security solution that requires certificates.
What are you using?
- A. WPA2-Enterprise
- B. WEP
- C. WPA-Personal
- D. WPA2-Personal
Answer: A
NEW QUESTION # 84
What is a common problem in specialty Wi-Fi devices?
- A. The use of 802.11 VHT-only chipsets
- B. The use of 802.11 DSSS-only chipsets
- C. The use of newer, more capable 802.11 chipsets
- D. The use of older, less capable 802.11 chipsets
Answer: D
NEW QUESTION # 85
What is entered on the AP and clients to configure WPA2-Personal?
- A. The WEP key
- B. The IP address of the RADIUS server
- C. A passphrase
- D. The actual preshared key
Answer: D
NEW QUESTION # 86
What are the basic steps involved in the WLAN connection process for 802.11 wireless networks?
- A. Passive scanning, Active scanning, 4-way handshake
- B. Authentication, Association, 4-way handshake
- C. Authentication, Association, 802.1X/EAP authentication
- D. Passive scanning, Active scanning, 802.1X/EAP authentication
Answer: B
NEW QUESTION # 87
Which factor can contribute to security issues in a wireless network if the passphrase is not properly configured?
- A. Incorrect network keys
- B. Configuration errors
- C. Incorrect passphrases
- D. Incompatible EAP methods
Answer: C
NEW QUESTION # 88
Which feature of an 802.11 AP allows the use of internal and external antennas?
- A. Multiple-SSID support
- B. Antenna support
- C. Operational modes
- D. Output power control
Answer: B
NEW QUESTION # 89
What kind of antenna chart shows the radiation pattern of an antenna from the side view of that antenna?
- A. Azimuth
- B. Top-down
- C. Elevation
- D. Horizontal
Answer: A
NEW QUESTION # 90
Of the following device types, which one is most likely to be used in a highly mobile (use while in motion) use case?
- A. Desktop
- B. VoIP handset
- C. Video camera
- D. Laptop
Answer: D
NEW QUESTION # 91
Which of the following is a measurement unit commonly used to assess RF signal strength?
- A. Output power vs. received signal strength
- B. Client signal strength reports
- C. RSSI vs. dBm
- D. Wireless scanner tools
Answer: C
NEW QUESTION # 92
Which of the following is not a commonly used EAP method in wireless networks?
- A. EAP-WPA3
- B. EAP-PEAP
- C. EAP-TLS
- D. EAP-LEAP
Answer: D
NEW QUESTION # 93
What do antenna pattern charts represent?
- A. Regulatory constraints on channel selection
- B. Antenna patterns and signal coverage areas
- C. Co-Channel Interference (CCI) and Co-Channel Contention (CCC)
- D. Available channels by protocol
Answer: B
NEW QUESTION # 94
At what point is RF power typically stipulated in milliwatts?
- A. One hundred feet from the transmitter
- B. Fifty feet from the transmitter
- C. At the transmitter
- D. At the receiver
Answer: C
NEW QUESTION # 95
What antenna would be best for a long distance (more than 5 kilometers) bridge link?
- A. Parabolic dish
- B. Omnidirectional
- C. Panel
- D. Patch
Answer: A
NEW QUESTION # 96
Which RF feature indicates the maximum power at which a device can transmit signals?
- A. Receive sensitivity
- B. Transmit power
- C. Supported channels
- D. Channel widths
Answer: B
NEW QUESTION # 97
What best describes passive scanning used to locate WLANs?
- A. Sending probe requests and listening for probe responses
- B. Scanning in only on frequency band
- C. Listening for beacon frames from the APs
- D. Scanning on only one channel
Answer: C
NEW QUESTION # 98
How many non-overlapping 20 MHz channels are available in the 5 GHz frequency band assuming the regulatory domain allows them all?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION # 99
A user reports sporadic performance problems with the WLAN. She works near the company lunch room, which has typical kitchen equipment. The problems seem to be worse during the lunch hour.
What is the likely case?
- A. Improper band preference settings
- B. Improper roaming settings
- C. RF interference
- D. Improper security settings
Answer: C
NEW QUESTION # 100
......
Latest CWNP CWT-101 Dumps with Test Engine and PDF: https://www.crampdf.com/CWT-101-exam-prep-dumps.html