Oct 10, 2022 OMS-435 Exam Crack Test Engine Dumps Training With 80 Questions
Obtain the OMS-435 PDF Dumps Get 100% Outcomes Exam Questions For You To Pass
NEW QUESTION 12
An OmniScript displays data from an API using Integration Procedure, but some of the data is missing.
Which two configuration errors could cause this? Choose 2 answers
- A. The missing data is trimmed in the Integration Procedure Action Response JSON Path.
- B. The Integration Procedure Preview Input Parameters do not match the JSON sent from the OmniScript.
- C. The JSOW sent from the Integration Procedure Action does not match any of the Original Input for the Integration Procedure
- D. The element name for the missing data does not match the JSON node key in the Integration Procedure Response.
Answer: A,D
NEW QUESTION 13
A developer is building an OmniScript and needs to retrieve data from Salesforce and from an on-premises billing database.
Which two OmniScript elements could retrieve this data?
Choose 2 answers
- A. HTTP Action
- B. Response Action
- C. Navigate Action
- D. DataRaptor Extract Action
Answer: D
NEW QUESTION 14
Refer to the exhibit.
A developer creates an OmniScript display FirstName, LastName, and BirthDate of a contact using a Type Ahead Block. The DataRaptor used in the Type Ahead has been tested and fetches the correct data.
When previewing Omniscript, the developer enters a name in the Type Ahead and makes a selection of a contact from the list. However, the text fields FirstName. LastName, and BirthDate are not getting populated with the data.
What is the reason that the fields fail to display the fetched data?
- A. Lookup Mode is not selected in the properties of the Type A Head Block.
- B. FirstName, LastName, and BirthDate are not placed inside the Type ahead Block.
- C. The Typeghead ley is not in the correct format
- D. Use Data JSON is not selected in the properties of the Type Ahead Block.
Answer: B
NEW QUESTION 15
A developer is creating a FlexCard for a new Community page. The FlexCard will display case information along with action to close the case and update the case. And it will be styled using the Community's theme.
What must be developer do to configure the FlexCard for deployment in a Community?
- A. Add the FlexCard's API name to FlexCard Player component
- B. Set the Target property in publish Options to Communitypage''
- C. Set the Developer property in Card Configuration to ''Community''
- D. Configure the Component visibility in the custom Component.
Answer: B
NEW QUESTION 16
A developer creates an Integration Procedure with a Set Values and a DataRaptor Extract Action that requires AccountId as a key. When the developer previews the Integration Procedure, the developer enters the AccountId correctly and execute the Preview. The developer sees the data extract by the DataRaptor in the Debug Log, but the response is empty.
What is the likely cause of this issue?
- A. The Response cannot be previewed directly.
- B. A Response Action was not added to the integration Procedure.
- C. The DataRaptor Action did not have the add response Ro Response JSON property set to true.
- D. The AccountId used for the preview is invalid.
Answer: B
NEW QUESTION 17
A developer creates a DataRaptor Extract to retrieve data to pass to an external service. The external service expects the field value to be integer. However, the DataRaptor is sending it as a string.
Which action can the developer take to fix this?
- A. In the DataRaptor Formula tab, define a formula using the function TOINTEGER and use the formula as output.
- B. In the DataRaptor Output tab, enter the default value as 0 on the field.
- C. In the DataRaptor Output tab, select the Output Data Type of that field to Integer.
- D. In the DataRaptor Extract tab, set the Input Data Type field to Integer.
Answer: C
NEW QUESTION 18
A developer creates an OmniScript to update billing information. After analyzing the different types of customer interactions that occur at the company, the developer determines updating billing information should be included in the majority of customer interactions, which are represented by more than 20 different FlexCards.
What is the most efficient way for the developer to configure the action that invokes the OmniScript?
- A. As a Lightning Action
- B. As a Custom Action
- C. As an OS Action
- D. As an OmniStudio Action
Answer: D
NEW QUESTION 19
Refer to the exhibit below.
What is the reason that the fields fail to display the fetched data?
- A. FirstName, LastName, and BirthDate are not placed inside the Type Ahead Block.
- B. Lookup Mode is selected in the properties of the Type Ahead Block.
- C. The typeHead key is not in the correct format.
- D. Use Data JSON is Not selected in the properties of the Type Ahead Block.
Answer: A
NEW QUESTION 20
An integration procedure contains a Remote Action element that calls a method of an APEX class. The method requires two fields are input: Accountid and ProductId. The integration Procedure data JSON contains the following nodes:
How should the Remote Action element be configured to pass the data correctly to the method?
- A. Check the DataRaptor Transform checkbox, and add the following Key/Value pairs to Output JSON Path:
- B. Set Return Only Additional Output to true, and add the following Key/Value pairs to additional input.
- C. Check the Send Only Additional Input checkbox, and the following/ value pairs to Additional input:
- D. Add the following to Send JSON Path: accountId: %Accountd% ProductId% Details Products%
Answer: B
NEW QUESTION 21
A developer needs to display read-only contact information in a OmniScript. The developer will format the information as a table, using merge codes to dynamically include first name, last name, street address, state, postal, code, and country from the data JSON.
Which OmniScript element should the developer use to meet this requirement?
- A. Edit Block
- B. Text area
- C. Text Block
- D. Rich text Area
Answer: C
NEW QUESTION 22
A developer needs to retrieve data from an external system that stores policy dat a. The external system supports REST APIs to access and update the policies. Due to the volume of the policy data and peak hours of hours of business, calls to the REST APIs sometimes take longer than expected to response.
The developer creates an Integration Procedure to retrieve the policy data for use in an OmniScript.
Given the external system's knows performance issues, which configuration should be used to implement the call to the external system?
Choose 2 answers
- A. Check the Chain on Step Check on the HTTP Action in the Integration Procedure
- B. Set the Timeout property on the HTTP Action in the Integration Procedure
- C. Check the Chainable checkbox on the integration procedure Action in the OmniScript
- D. Configure a Remote action with timeout settings of 120000
Answer: A,D
NEW QUESTION 23
A developer needs to display the following information together on one FlexCard:
* Account name, address, phone number, website
* Primary contact first name, contact name, address, phone number, email The account information must always be visible, and the contact information should only be visible as needed by the user.
What approach should the developer use to display the contact information on the card?
- A. Set the class'' collapsible'' on the block element
- B. Use a Datatable element
- C. Set the collapsible property on the block element
- D. Use a conditional FlexCard State
Answer: C
NEW QUESTION 24
Refer to the exhibit.
A developer creates an OmniScript display FirstName, LastName, and BirthDate of a contact using a Type Ahead Block. The DataRaptor used in the Type Ahead has been tested and fetches the correct data.
When previewing Omniscript, the developer enters a name in the Type Ahead and males a selection of a contact from the list. However, the text fields FirstName. LastName, and BirthDate are not getting populated with the data.
What is the reason that the fields fail to display the fetched data?
- A. Lookup Mode is not selected in the properties of the Type A Head Block.
- B. FirstName, LastName, and BirthDate are not placed inside the Type ahead Block.
- C. The Typeghead ley is not in the correct format
- D. Use Data JSON is not selected in the properties of the Type Ahead Block.
Answer: B
NEW QUESTION 25
A developer needs to create a list of cases for an account in a single Datable in a FlexCard. Like the one shown below.
How can the developer configure the FlexCard to display the case records in this way?
- A. Select the Repeatable Mode property on the data table elements
- B. Enable the Repeat Records feature on the FlexCard Setup tab
- C. Disable the Repeat Record feature on the FlexCard setup tab
- D. Enable the record Looping feature on the data table elements
Answer: C
NEW QUESTION 26
Why would a developer clone an Integration Procedure instead of versioning it?
- A. The new Integration Procedure it replacing stub data.
- B. The new Integration Procedure is Chainable.
- C. The new Integration Procedure will be used independently
- D. The new Integration Procedure uses a Cache Block.
Answer: C
NEW QUESTION 27
A developer configure a Flexcard with a DataRaptor data source that uses the params.id as an. When the developer clicks Views Data on the FlexCard, valid data displays. However, when the developer previews the layout, the FlexCard does not display. What could cause this error?
Choose 2 answers
- A. The RecordId in the Test Data Source settings ins for the wrong record type.
- B. There is not Salesforce record for the FlexCard based on the RecordId in the layout's Test Data Source Settings.
- C. The Data Node field for the FlexCard is empty.
- D. The attribute haven't been configured to pass the data to the fields.
Answer: A,D
NEW QUESTION 28
A developer is creating an OmniScript that provisions trail orgs to their customers. The following text block in the Omniscript uses a merge code to display the ID for the new trail org:
- A. To %sDetails: Customer|0: ID$
- B. To %Details: Customer|1: ID%
- C. To %%sDetails: Customer|0: ID%%
- D. To %Details: Customer|n: ID%
Answer: B
NEW QUESTION 29
A developer creates a FlexCard with five state elements. For of the states have a condition. To test the FlexCard, the developer previews it using sample data that causes two of the states to have true conditions.
In this scenario, how will the developer know which state will display?
- A. The first state with a true AND condition, regardless of sequence in the FlexCard canvas, will display.
- B. The first state with true nested condition, regardless of sequence in the FlexCard canvas, will display
- C. The first state with true conditions sequence closest to the top of the FlexCard canvas will display.
- D. The state sequenced first in the FlexCard canvas will display.
Answer: C
NEW QUESTION 30
A developer needs to display the following information together on one FlexCard:
* Account name, address, phone number, website
* Primary contact first name, contact name, address, phone number, email The account information must always be visible, and the contact information should only be visible as needed by the user.
What approach should the developer use to display the contact information on the card?
- A. Set the class'' collapsible'' on the block element
- B. Use a conditional FlexCard State
- C. Use a Datatable element
- D. Set the collapsible property on the block element
Answer: B
NEW QUESTION 31
......
OMS-435 Exam Dumps Contains FREE Real Quesions from the Actual Exam: https://www.crampdf.com/OMS-435-exam-prep-dumps.html
Free Test Engine Verified By Salesforce Developer Certified Experts: https://drive.google.com/open?id=15m19gB73Sw1A67Vz_fNn_ebbBi4ovJA7