New (2023) Download free JN0-363 PDF for Juniper Practice Tests
100% Free JN0-363 Files For passing the exam Quickly
The JN0-363 exam covers a range of topics including OSPF, BGP, MPLS, VPNs, and Junos configuration. Successful candidates will be able to configure, monitor, and maintain Juniper Networks devices in a service provider network, troubleshoot network issues, and implement security policies. Service Provider Routing and Switching, Specialist (JNCIS-SP) certification exam consists of 65 multiple-choice questions and must be completed within 90 minutes. Candidates must achieve a passing score of 65% or higher to earn the JNCIS-SP certification.
NEW QUESTION # 151
Click the Exhibit button.
You configured R1 and R2 to form an OSPF adjacency, but the adjacency will not establish.
Referring to the exhibit, which statement correctly identifies the problem?
- A. R1 does not have a router ID defined
- B. Hello and dead timers are not matching between R1 and R2
- C. R2 has a wrong area configured
- D. R1 and R2 have the same router ID
Answer: D
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/reference/configuration-statement/router-id-edit-routing-options.html
NEW QUESTION # 152
Which two statements are true when considering logical systems? (Choose two.)
- A. Logical systems share the master routing table and can create routing instances
- B. Logical systems provide management separation by providing user access per logical system
- C. Logical tunnels cannot be used to connect logical systems
- D. Logical systems do not support nonstop active routing
Answer: B,C
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/security-logical-systems-for-routers-and-switches.html
NEW QUESTION # 153
Which two statements are true for GRE tunneling? (Choose two.)
- A. GRE tunnels support multiple logical units per interface
- B. GRE tunnels are stateful by default
- C. GRE tunnel endpoints must have a valid route to the remote endpoint
- D. GRE tunnels support only one logical unit per interface
Answer: A,C
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/topic-map/filtering-unicast-packets-multicast-tunnel-interfaces.html#id-configuring-unicast-tunnels
NEW QUESTION # 154
You are asked to create connections between routing instances on the same Junos device and route between the connected Instances. What are two ways to accomplish this task? (Choose two.)
- A. Use logical tunnel interfaces.
- B. Use physical interfaces.
- C. Use an IRB interface.
- D. Use loopback interfaces.
Answer: B,C
NEW QUESTION # 155
Referring to the exhibit, which two statements are correct? (Choose two.)
- A. Traffic ingressing ge0/0/0 that Is tagged with VLAN 200 will egress ge-0/0/1 with an outer VLAN tag of 200.
- B. Traffic ingressing ge-0/0/0 that is tagged with VLAN 101 will egress ge-0/0M with an outer VLAN tag of 200.
- C. Traffic ingressing ge-0/0/0 that is tagged will VLAN 100 will be dropped.
- D. Traffic ingressing ge-0/0/0 that is tagged with VLAN 101 will egress ge-0/0/1 unchanged.
Answer: C,D
NEW QUESTION # 156
You have an established LSP between your R1 and R5 devices using the configuration shown in the exhibit. You are asked to ensure that MPLS labels are used to forward traffic by all devices within the LSP.
Which action will accomplish this behavior?
- A. Configure the ultimace-hop-popping statement under the R1_TO_R5 label switched path on R1.
- B. Configure the install statement under the R1_TO_R5 label switched path on R1.
- C. Configure the explicit-null statement under the protocol mpls hierarchy on R1.
- D. Delete the no-espf statement under the R1_TO_R5 label switched path on R1.
Answer: B
NEW QUESTION # 157
An IS-IS TLV includes which two attributes? (Choose two.)
- A. Length
- B. Topology
- C. Vector
- D. Value
Answer: A,D
NEW QUESTION # 158
Exhibit
Referring to the exhibit, how do you verify the status of the tunnel from R1?
- A. Issue the ping 172.20.111.10 source 198.51.100.1 command.
- B. Issue the ping 172.20. Ill. 10 command.
- C. Issue the ping 172.20.111.10 source 172.20.110.1 command.
- D. Issue the ping 172.20.iii.io source 203.0.113.2 command.
Answer: D
NEW QUESTION # 159
Router A receives two similar route advertisements from different BGP peers.What would cause a route to be selected in this scenario?
- A. learning a route from a peer with a higher peer ID
- B. having a lower local preference
- C. learning a route from a peer with a higher IGP metric
- D. having a lower MED value
Answer: D
NEW QUESTION # 160
Click the Exhibit button. From the output shown in the exhibit, what would happen to a packet destined for address 172.29.3.5?
- A. The address is in the aggregate range; the packet will be silently dropped.
- B. The address is not in the aggregate range; the packet is sent to the Routing Engine.
- C. The address is in the aggregate range; the packet will be dropped.
- D. The address is not in the aggregate range; the packet will be forwarded.
Answer: C
NEW QUESTION # 161
Click the Exhibit button.
Referring to the exhibit, why is the route hidden?
- A. The protocol next hop is not reachable
- B. The MPLS LSP to the 192.168.0.2 peer is down
- C. The wrong BGP address family is enabled for the BGP session
- D. The route has yet to be verified
Answer: A
NEW QUESTION # 162
What are two characteristics of a traditional Ethernet LAN? (Choose two.)
- A. Nodes share a physical medium.
- B. Nodes use a step-up algorithm when collisions are detected.
- C. It consists of a single broadcast domain.
- D. Nodes can successfully transmit simultaneously.
Answer: A,C
NEW QUESTION # 163
Click the Exhibit button. Referring to the exhibit, what must be true of the vlan_100 bridge domain?
- A. vlan_100 does not have an Ethernet interface assigned to it.
- B. vlan_100 has at least one Ethernet interface assigned to it.
- C. vlan_100 might have an active Ethernet interface assigned to it.
- D. vlan_100 does not have an active Ethernet interface assigned to it.
Answer: D
NEW QUESTION # 164
Exhibit
Referring to the exhibit, internal BGP between R1 and R2 is not establishing.
What is the problem In this scenario?
- A. R1 needs to be configured with a next-hop self policy.
- B. R1 needs to be configured with an explicit router ID.
- C. R1 does not have a route to 192.168.200.2.
- D. R1 and R2 must each have unique AS numbers.
Answer: C
NEW QUESTION # 165
Click the Exhibit button.
Your co-worker configures the ge-0/0/0 interface with an IPv6 address of 2001:db8:0:9::/64. After committing the configuration, your co-worker executes the command shown in the exhibit.
What is the fe80::206:aff:fe0e:e01/64 address in this scenario?
- A. the link-local address
- B. the statically assigned address
- C. the loopback address
- D. the multicast address
Answer: A
NEW QUESTION # 166
Click the exhibit.
Referring to the exhibit, which configuration must be set on R2 to from a Level 1 IS-IS adjacency with R1?
- A. Set interfaces lo0 unit 0 family iso address 49.0001.3414.0010.0250.0000.0046.00
- B. Set interfaces lo0 unit 0 family iso address 49.0002.3414.0010.0250.0000.0046.00
- C. Set interfaces lo0 unit 0 family iso address 49.0001.3415.0010.0250.0000.0046.00
- D. Set interfaces lo0 unit 0 family iso address 49.0002.3415.0010.0250.0000.0046.00
Answer: C
NEW QUESTION # 167
What are three types of MPLS routers? (Choose three.)
- A. transit routers
- B. egress routers
- C. peering routers
- D. aggregation routers
- E. ingress routers
Answer: A,B,E
NEW QUESTION # 168
You are asked to configure and apply a new routing policy to influence routing advertisements received from a specific EBGP peer.
In this scenario, which statement is true?
- A. The new policy should be applied as an export for the EBGP group in which the peer is defined.
- B. The new policy should be applied as an import policy for the EBGP group in which the peer is defined.
- C. The new policy should be applied as an import policy for the specific EBGP peer.
- D. The new policy should be applied as an export policy for the specific EBGP peer.
Answer: C
NEW QUESTION # 169
Exhibit
You configured interface ge-0/070.0 to run IS-IS. but this interface does not appear in the output of the show isis adjacency command as shown in the exhibit.
What is the problem in this scenario?
- A. The router at the other end of the link Is not sending any IS-IS Hello messages.
- B. This is a Gigabit Ethernet interface, that is incompatible with the reference-bandwidth 100g statement.
- C. The router at the other end of the link is a Level 1 only router.
- D. The family iso statement must be added to the logical interface.
Answer: D
NEW QUESTION # 170
Exhibit
You have configured graceful RE switchover (GRES), however you cannot complete the show system switchover command.
Referring to the exhibit, what is the problem?
- A. The command is only available If graceful restart is enabled.
- B. The command is only available If a backup router is configured.
- C. The command is only available if non-stop routing is enabled.
- D. The command is only available on the backup Routing Engine.
Answer: D
NEW QUESTION # 171
......
Juniper JN0-363 Exam Topics:
| Section | Objectives |
|---|---|
| IPv6 | - Identify the concepts, operation, or functionality of IPv6:
- Demonstrate knowledge of how to configure, monitor, or troubleshooting IPv6:
|
| Layer 2 Bridging or VLANs | - Identify the concepts, operation, or functionality of Layer 2 bridging for the Junos OS:
- Identify the concepts, benefits, or functionality of VLANs:
- Demonstrate knowledge of how to configure, monitor, or troubleshoot Layer 2 bridging or VLANs:
|
| Multiprotocol Label Switching (MPLS) | - Identify the concepts, operation, or functionality of MPLS:
- Demonstrate knowledge of how to configure, monitor, or troubleshoot MPLS:
|
| High Availability | - Identify the concepts, benefits, applications, or requirements of high availability:
- Demonstrate knowledge of how to configure, monitor, or troubleshoot high availability components:
|
JN0-363 Premium Exam Engine - Download Free PDF Questions: https://www.crampdf.com/JN0-363-exam-prep-dumps.html
JN0-363 Dumps Questions Study Exam Guide : https://drive.google.com/open?id=1H3gUVooAm4jo7pCp1mw_cp5okOGK1otg